In recent years, the use of sliding doors because of its unique advantages, more widely used, and daily use, sliding doors can slide freely as it once did. Also it may not be fixed door, leaving an excess of play, when the door is in the locked position. You consider replacing the sliding door, maybe make some minor adjustments, the door will become like new again.

      1. vacuum door rail sliding door closed. Open the sliding door vacuum the other track half.

      2. Position adjustments, including hidden roller adjustment screw. Will cover each end towards the door frame in the lower house. Some on both ends of the door toward the bottom of the upper edge of.

      3. flat-head screwdriver into the slot cover, then cover counterclockwise from the door. Some insert a screwdriver between the cover and frame will pop up.

      4. Turn the adjustment screw with a screwdriver counterclockwise for lower gate roll. Test the operation of the door, to see if it smoothly decline. If you need to raise the door, forced open the door edge slightly, then turn the adjusting screw clockwise.

      5. In the locked position of the door opening, the door latch. The latch on the door edge has a screw just above. Counterclockwise rotation of the screw with a screwdriver to adjust the latch. This will pull the latch to seal between the door and tighten the door is closed and locked the door and door frame.

      6. unlocked and close the sliding door. Latch lock, and pull the door slightly to check the play. There should be little movement, a little when you pull on the door handle.

      So, before you consider replacing the sliding door, maybe it's a little more than a few small adjustments, it will give you unexpected results.